|Place of Origin:||CHINA|
|Minimum Order Quantity:||1|
|Delivery Time:||7-14 Workdays|
|Payment Terms:||T/T, L/C, Western Union, MoneyGram, D/P, D/A|
|Supply Ability:||10000/per month|
|Product Name:||100L Flat Plate Solar Collector||Inner Tank Material:||304 Stainless Steel|
|Capacity:||100L||Outer Tank Material:||Color Steel|
|Flat Plate Collector:||2000*1000*80mm||Bracket Material:||Color Steel|
|Bracket Angle:||27 Degree||Certificate:||CE/ISO/Solar Keymark|
CE 100L Flat Plate Solar Collector,
100 Ltr evacuated tubular collector,
INMETRO Flat Plate Solar Collector
CE certified Solar hot water heater 100L flat plate solar collector
To heat water in the winter, should families using solar water heaters with a electric heater(Resistance bar) to save electricity?
Installation is not difficult
In the North, in addition to the cold weather, in the winter, there is little sunlight, so the100L flat plate solar collector does not work well. Even many families at times can not use the bottle because the water is too cold, not unlike the water flowing from the tap.
To remedy this situation, 100% of households currently using 100L flat plate solar collector have installed hot and cold water heaters. Depending on the conditions, they can be installed in consumption places such as toilets, kitchens ...
Accordingly, the experts agreed with the installation of an auxiliary heating device directly (electric heater )to the solar water heater.
When it's overcast, the 100L flat plate solar collector can't heat the water. At this point, the resistor will become an indirect water heater - like a normal electric water heater. Note, you only need power resistance when solar radiation is not enough to heat up and you still want to use hot water.If you use this device, in the winter, you can still save 70% on electricity compared to using an electric heater .
It is not difficult to install this auxiliary device. You can now buy it at stores that sell 100L flat plate solar collector or electrical appliances. The solar water heater itself has been designed to fit in with this device.
Accordingly, when installing, workers just need to open the lid on the insulation tank, put the resistance bar in and set the mode, pull the power source to suit the level of use.
Active mode and temperature settings
To ensure there is hot water in the absence of solar radiation, the simplest and cheapest way is to install a resistance bar for solar water heaters. To reduce the heat loss of the bottle, it is necessary to set a low resistance temperature of about 40 to 50oC. Hot water pipes from pots to households such as bathrooms, kitchens should be insulated carefully.
In addition, it is necessary to attach anti-shock safety devices. For added safety, the resistor must be disconnected before using hot water.
Similarly, another solution is to use solar energy in combination with a heat pump. That is, install a hot water heater in series with the solar water heater. When there is no solar energy, the heat pump is used to boil water. Heat pumps are more energy efficient (can save up to 60-70% of the electricity) but the initial investment is very expensive.
Experts concur, because the100L flat plate solar collector is well insulated, so when using the resistance bar, it will help keep the hot water for a long time like a heater. The heating of the 100L flat plate solar collector is equal to that of an on-site heater. Therefore, do not be afraid to waste hot water when not in use. Particularly in the days when the sunlight is weak, the water temperature is inherently warm, now heating with the resistance bar will quickly heat, saving more electricity.
1. Inner Tank:
Food grade SUS 304 stainless steel/316 stainless steel, 1.2mm, diameter 360mm
Out Tank: Galvanized steel/201 stainless steel/304 stainless steel, 0.4mm, diameter 460mm
Insulation: 50mm high-density polyurethane foamed
Inlet&Outlet: 1/2” or 3/4”, stainless steel
Copper Coil: Single copper coil or double copper coil
2. Flat Plate Solar Collector
Dimension L*W*H (mm): 2000*1000*80
Cover Material: Low iron, tempered glass
Surface Treatment: Black chromed/blue film
Header: Copper TP2 22mm* 0.6mm (6 pcs)
Riser: Copper TP2 22mm* 0.6mm (6 pcs)
Insulation: Fiber glass
Casing: Anodized aluminum alloy frame
Bracket: Galvanized steel sheet, 1.5mm/201 stainless steel, 1.2mm/aluminium alloy, stainless steel screws & nuts
Electric heater, magnesium anode,TP valve, working station(include digital controller, circulation pump, expansion vessel, safety valve & fittings) and so on
|Model||Flat Plate Solar Collector||Collector Bracket||
Pressurized Water Tank
|Accessories||FOB shanghai /USD for 40HQ container|
|BS-FPC-P 100L||1*BS-FPC-1||1||FPC-P 100L||Do not include||US$224.00|
|BS-FPC-P 150L||1*BS-FPC-1.25||1||FPC-P 150L||Do not include||US$284.00|
|BS-FPC-P 200L||2*BS-FPC-1||2||FPC-P 200L||Do not include||US$410.00|
|BS-FPC-P 250L||2*BS-FPC-1.25||2||FPC-P 250L||Do not include||US$479.00|
|BS-FPC-P 300L||3*BS-FPC-1||3||FPC-P 300L||Do not include||US$588.00|
FPC Flat Plate Solar Collector
|Riser Pipe Type||GRID|
|Header Pipe Material and Qty.||Copper TP2, Ø22 mm (2 pipes)|
|Riser Pipe Material and Qty.||
Copper TP2, Ø8 mm
Copper TP2, Ø8 mm
|Gross Area (m2)||2.5||2.0|
|Net Weight (kgs)||35||30|
|Liquid Capacity (ltr)||1.53||1.23|
|Surface Treatment||Sputtering (Blue Titanium Absorber) (Bluetec)|
|Absorber Plate Material||Aluminum Board|
|Frame Material||6063 T5 Aluminum Profile,Thickness : 1.2mm|
|Back Plate||Galvanized Steel|
|Insulation Material & Thickness & Density||Fiber Glass 30mm,Density:36g/m3|
|Transparent Cover||Super White Low Iron Embossed Tempered Glass, δ3.2mm, Light Transmission ≥ 91.5%|
|Instant Thermal Efficiency (η)||0.79||0.77|
|Heat Transmission Medium||70% Propylene Glycol+30% Pure Water|
|Test Pressure (Mpa)||1.2 Mpa, and Keep 15 Minutes|
|Working Pressure (Mpa)||0.7|
|Advising Flow Rate (L/H- m2)||70～80|
|Heat Loss Coefficient a1* (w/ m2.℃)||3.25||5.00|
|Collector Stuffy Temperature (℃)||190||180|
FPC-P Series Pressurized Water Tank
|Model||Inner Tank||Insulation Layer||
|Coil Length||Tank Height|
|Dual Coil (m)||(mm)|
|FPC-P Series Pressurized Water Tank Specification|
|Inner Tank||Food grade SUS 304-2B stainless steel|
|Out Tank||Galvanized steel|
|Insulation||High-density polyurethane foamed|
|Inbuilt Heat Exchanger||Copper or stainless steel (Φ12/16/19/25mm)|
(2) Optional Accessories and their Function:
PT valve: temperature and pressure safety valves, with dual temperature and pressure protection;
Electric backup: to heat water when rainy and cloudy days;
Magnesium bar: to soften water in hard water area;
TK-8A/TK-7/TK-5 digital controller: to control water level, feed water automatically and control the operation of electric heater at a certain tempeature as we except
Check valve: to prevent hot water from flowing backwards
The main use is for family use, such as bathing, cloth washing and so on.
Solar water heater with assistant tank model is widely used in apartment, hotel and school.
Also it can be used for swimming pool, farm.
1- What is your Delivery Time?
LCL order/Sample order: within 7 days.
Full container order: 7-14days.
2- What is your Guarantee Time?
Provide you with 1%-2% extra accessories and vacuum tubes, they are free for you.
3- Can you accept OEM ?
4- What is your Payment Term?
We accept T/T or L/C at sight, Western Union.
5- What is your MOQ?
6- What is your Packing?
LCL order/Sample order in wood cartoon.
Full container order in high quality standard export carton.
7- What is your FOB Port?
We accept FOB Shanghai, Ningbo etc.
8- What is your Monthly Production Capacity?
9- What is your Shipping Term?