The Copper Coil Solar Water Heater system supplies hot water through an efficient copper coil, which is placed in the water tank as a heat ex-changer that supplies a large area of heat transfer in its 40 meters length.
This system solves the problems of limiting hot water and system pressure.
The copper coil solar water heater is recommended for pump pressurized installation system.
Copper Coil Solar Water Heater can be seen as pressurized model, although the water tank of pre-heated solar water heater usually is non-pressurized tank, but inside tank there is a copper coil which can bear pressure, and the water for use is from the copper coil, however the water in tank is only use to transfer heat to the water in copper coil.
Copper Coil Solar Water Heater, when tap water inlet opens, the cold water begins to circulate inside the copper coil, water will heat up to the equal temperature with the water in tank, and travel through the hot water pipe and mix with cold water in the shower mixer or sink. In this way, the water used for consumption is fresh water that has just been heated.
Working Principle
The glass vacuum tubes absorb light energy through the AL/N/AL/SS/CU coating and converts the light energy into heat energy stored in the insulated water tank. The running water (cold water) is heated while passing through the built-in copper coil (heat exchanger) of the water tank, then high pressure hot water is coming out from outlet.
Features
The water tank has a built-in copper coil (heat exchanger) for secondary instant heat exchange. The difference between the hot water outlet temperature and the tank temperature is less than 10℃. The hot water outlet pressure is high and equal to the tap water pressure. The copper coil test pressure is 0.9Mpa, but the water tank itself does not bear any pressure. The water tank is only used as a heat storage medium, and fresh hot water in the copper coil is used for domestic hot water directly.
Technical Specification:
Inner Tank:
Food grade SUS 304 stainless steel/316 stainless steel, 0.4-0.6mm, diameter 360mm/380mm
Out Tank: Galvanized steel/201 stainless steel/304 stainless steel, 0.4mm, diameter 460mm/480mm
Insulation: 50mm high-density polyurethane foamed
Inlet&Outlet: 1/2” or 3/4”, stainless steel
Copper Coil: Copper coil
Vacuum Tube: QB-AL-N/AL-47mm/58mm-1800mm
Water Tank Bracket: Galvanized steel sheet, 1.5mm/201 stainless steel, 1.2mm/aluminium alloy, stainless steel screws & nuts
Accessories: Assistant tank, electric heater, magnesium anode, TK-8A/TK-7/TK-5 digital controller and so on
Model |
Evacuated Tube |
Tank and Tube Capacity (L)
|
Person NO. |
||
Diameter (mm) |
Length (mm) |
Quantity (pcs) |
|||
BS-PH/PHS-581800-10 |
58 |
1800 |
10 |
100 |
1-2 |
BS-PH/PHS-581800-12 |
58 |
1800 |
12 |
120 |
2-3 |
BS-PH/PHS-581800-15 |
58 |
1800 |
15 |
150 |
3 |
BS-PH/PHS-581800-18 |
58 |
1800 |
18 |
180 |
3-4 |
BS-PH/PHS-581800-20 |
58 |
1800 |
20 |
200 |
4 |
BS-PH/PHS-581800-24 |
58 |
1800 |
24 |
240 |
4-5 |
BS-PH/PHS-581800-30 |
58 |
1800 |
30 |
300 |
6 |
Solar water heater with assistant tank model is popular in India, South America and Africa.
Without assistant tank or with assistant tank on the top, the main big tank is full of water. When the water gets hot, if the hot air can't get out quickly, there is much pressure in the tank. The pressure will damage the non-pressure tank.
Secondly, because the tank is full of water, the above welding of the inner tank is dipped in the hot water all the time. It may make the welding place leak. Especially in some place, the water is very hard.
So according to these problems, we designed the new solar water heater with assistant tank model. Using side assistant tank, there is a little space on the top of tank, so it will decrease the pressure in the tank.
Because there is no water on the top, the welding will not be dipped in the tank, so will prevent the corrosion and rust better.
Besides, we use non-welding technology.
Welding is damage to stainless steel. We wrap the cover on the main inner tank, there is no welding, so there is no rusty, corrosion and leaking.
FAQ:
1- What is your Delivery Time?
LCL order/Sample order: within 7 days.
Full container order: 7-14days.
2- What is your Guarantee Time?
5 years.
Provide you with 1%-2% extra accessories and vacuum tubes, they are free for you.
3- Can you accept OEM ?
YES.
4- What is your Payment Term?
We accept T/T or L/C at sight, Western Union.
5- What is your MOQ?
1 set.
6- What is your Packing?
LCL order/Sample order in wood cartoon.
Full container order in high quality standard export carton.
7- What is your FOB Port?
We accept FOB Shanghai, Ningbo etc.
8- What is your Monthly Production Capacity?
10000 sets.
9- What is your Shipping Term?
By Sea/Air/Rail.
Our solar water heater utilizes vacuum tubes coated with a high-performance AL/N/AL/SS/CU layer, converting sunlight into heat with exceptional efficiency. The built-in copper coil heat exchanger ensures that cold water is heated instantly as it passes through, delivering high-pressure hot water at the tap.
Constructed with food-grade SUS 304/316 stainless steel and insulated with high-density polyurethane foam, our system is built to last while ensuring your water is safe and clean.
From the robust inner and outer tank materials to the innovative copper coil design, every aspect of our solar water heater is engineered for reliability and performance.
Your perfect product is just an inquiry away. Submit your form now and start your journey with us today
Service Advantages:
Cooperation Process: We've streamlined our cooperation process to ensure a smooth, efficient, and transparent partnership. From initial inquiry to post-sales support, we're with you every step of the way.
Packaging Methods: Our products are packaged with care, using durable materials that ensure safe delivery and ease of handling, no matter the destination.
Our Journey: Pioneering Solar Energy Since 2007
Founded in 2007, BABYSUN has been at the forefront of the solar energy revolution. As a China-based pioneer in the solar energy industry, we specialize in the sales, production, and development of high-quality solar energy products. Our range includes solar water heaters, solar water pumps, solar freezers, and solar PV panels, among others. With a focus on the global market, we've dedicated ourselves to bringing sustainable energy solutions to homes and businesses worldwide.
Our Mission: Lighting Up Lives with Solar Power
At BABYSUN, we believe in the power of solar energy to transform lives and protect our planet. Our mission is to harness the sun's endless energy to provide eco-friendly, efficient, and reliable solar solutions. With over 15 years of exporting experience, our products have illuminated lives across Asia, South America, Africa, and beyond, earning us a reputation for quality and innovation.
Our Team: Experts in Solar Innovation
Our strength lies in our team—a group of passionate experts with deep knowledge in product development, market dynamics, and customer service. Together, we're committed to helping our customers thrive, enjoying life's journey, and making a positive impact on the world.